REMOTE START

Car configuration discussions and experience sharing
Jojo1983
Posts: 1
Joined: Fri May 29, 2020 7:42 pm
Vehicle: S-max 2.0 Tdci AWD / 180hp. 2017

Re: REMOTE START

Post by Jojo1983 »

hi

i ordered 2 Pcs 434 Mhz keys and they doesn't work on my car then i ordered 868 Mhz keys and i coul program it, no i statt Forscan to activate the Remote start and after that no key was working outside from slot also no buttons. :roll: :o

so now it works again with original keys, my question is now, what i have done wrong?

im from Switzerland and have a S-Max 2017 2.0 TDCi 180Hp Powershift AWD
Laqpis_
Posts: 1
Joined: Sun Jan 12, 2020 3:58 pm
Vehicle: MK5 Modeo 150HP - MK4 Mondeo 140HP

Re: REMOTE START

Post by Laqpis_ »

Hi!

Where I can find DS7T-15K601-EF key? CNautokeys can't delivery in Finland :/
rglonewolf
Posts: 11
Joined: Thu May 20, 2021 10:44 am
Vehicle: Ford Focus ST MK4 2.3L Petrol Race Red
Location: N/W England

Re: REMOTE START

Post by rglonewolf »

I have a new 2021 kuga and I have remote start working via the ford pass app. Can I just order a HS7T-15K601-ED key, program it and it will work?
Would I need to change any settings via Forscan?
It looks to be a US only key from what I can find.
diem trang2
Posts: 1
Joined: Sun Feb 23, 2020 12:31 am
Vehicle: ford explorer

Re: REMOTE START

Post by diem trang2 »

kovlo wrote:
Fri Nov 20, 2020 9:21 pm
Is it possible to activate remote start on a car with manual transmission (2016 S-max 2.0 Tdci)? The car has keyless go and keyless entry.
If the if the gearbox is left in neutral and the parking brake is applied I'd assume the car is fixed, and can not move.

Thanks for your ideas!
have you done it successfully?
andrew2606
Posts: 4
Joined: Wed Jul 08, 2020 4:40 pm
Vehicle: Ford ecosport 2018 1.0

Re: REMOTE START

Post by andrew2606 »

bycincik wrote:
Fri Feb 12, 2021 11:43 am
I have 2017 1.5 tdci ford focus .. everything ok. only my vehicle does not have an RTA module. But there is an RFA module. How do I need to configure the RFA module. Please help.


Image
Got same problem on Ecosport 1.0 ecoboost 2018. My 3rd key is a Mustang with JR3T-15K601-ED. Any help ?
stingone
Posts: 21
Joined: Sun Jun 11, 2017 6:13 pm
Vehicle: Ford Mondeo, 1.5 duratec, 120HP, 2016

Re: REMOTE START

Post by stingone »

fordsmax471 wrote:
Mon Aug 17, 2020 5:08 pm
misiak wrote:
Sat Aug 15, 2020 10:59 pm
fordsmax471 wrote:
Sat May 02, 2020 5:11 pm
look it's
but I didn't change anything from this RTM module
2 original keys and one remote start key are working very good ;)
https://www.youtube.com/watch?v=k76ESOMS5z0
Hi fordmax, I’m litle bit confused. Do all three keys works forw remote opening and keyless starting or only the new 3rd key and the other two have to be placed into a slot? I would really appretiate if all 3 keys works as normal with an advantage of 3rd key to remotelly start the engine. I don’t understand why those 2 original keys stop working after programming. Is this possible? I have smax mk2 2016 btw.
Hi
Yes all three keys (2 old original and 1 new key to remote start) forw remote opening and keyless starting.
because I did not make any changes to the RTM module.
if a new key not work , you will need to make a change to the RTM module.
but then the old 2 original keys will no work, except for the spare slot.
What type model key did you bought and where?
User avatar
fordsmax471
Posts: 1062
Joined: Mon Aug 07, 2017 5:29 pm
Vehicle: Ford S-Max 2.0 TDCi 2017 PowerShift

Re: REMOTE START

Post by fordsmax471 »

jonrocks
Posts: 7
Joined: Sat Apr 24, 2021 8:00 pm
Vehicle: ford edge 2l 180 2018

Re: REMOTE START

Post by jonrocks »

andyh1108 wrote:
Wed May 06, 2020 3:26 pm
fordsmax471 wrote:
Tue Dec 17, 2019 6:19 pm
Hi !

Remote start the car ( Ford S-Max 2.0 TDCi 2017 PowerShift EU )

4Button Remote smart Key 434MHZ DS7T-15K601-EF

guide for Ford S-Max mk2
To activate Remote Start, first you need a new key fob with start button (part # DS7T-15K601-EF for S-Max mk2 with 434 MHz).

:!: Note ! remove the metal blanks from the keys, the car doors are closed and the handbrake deactivated.

Programming keys
Determine the backup slot of the passive key.

:arrow: Place the first programmed key in the backup slot. Press the START / STOP button.
Wait for 4-5 seconds, then press the START / STOP button.
Extract the first programmed passive key.

:arrow: Within 5 seconds, place the second programmed passive key in the backup slot, then press the START / STOP button.
Wait for 4-5 seconds, then press the STOP-STOP button.
Extract the second programmed key.

:arrow: Within 5 seconds, place the unprogrammed passive key in the backup slot and press the START / STOP button.

Car doors lock and opened, lights blink
Congratulations on your new key being programmed !!! :)

Now use Forscan to change the asbuilt-data

BCM module- configuration parameters
• Remote start - enable

IPC module - configuration parameters
• Remote start - enable
• Remote start - climate settings- enable
• Remote start - front seat- enable (optional)
• Remote start - rear defrost – enable (optional)
• Remote start - steering feel – enable (optional)

some guides recommend
RTM module - configuration parameters
don't change anything :!: ( old keys can also be used in the future )
Thanks for the information, I assume this is a UK vehicle as I want to add this to my Edge. Can you tell me where you got the key from?

Andy
Hi Andy,

I too am about to do this for the Ford Edge I have a 434 freq key arriving in a few days.

Did you manage to get this working with your FORD EDGE if so do you have any tips?

Thanks

Jon
stingone
Posts: 21
Joined: Sun Jun 11, 2017 6:13 pm
Vehicle: Ford Mondeo, 1.5 duratec, 120HP, 2016

Re: REMOTE START

Post by stingone »

fordsmax471 wrote:
Tue Dec 17, 2019 6:19 pm
Hi !

Remote start the car ( Ford S-Max 2.0 TDCi 2017 PowerShift )

4Button Remote smart Key 433 or 434 MHZ DS7T-15K601-EF (please see ford etis )

guide for Ford S-Max mk2
To activate Remote Start, first you need a new key fob with start button (part # DS7T-15K601-EF for S-Max mk2 with 434 MHz).

:!: Note ! remove the metal blanks from the keys, the car doors are closed and the handbrake deactivated.

Programming keys
Determine the backup slot of the passive key.

:arrow: Place the first programmed key in the backup slot. Press the START / STOP button.
Wait for 4-5 seconds, then press the START / STOP button.
Extract the first programmed passive key.

:arrow: Within 5 seconds, place the second programmed passive key in the backup slot, then press the START / STOP button.
Wait for 4-5 seconds, then press the STOP-STOP button.
Extract the second programmed key.

:arrow: Within 5 seconds, place the unprogrammed passive key in the backup slot and press the START / STOP button.

Car doors lock and opened, lights blink
Congratulations on your new key being programmed !!! :)

Now use Forscan to change the asbuilt-data

BCM module- configuration parameters
• Remote start - enable

IPC module - configuration parameters
• Remote start - enable
• Remote start - climate settings- enable
• Remote start - front seat- enable (optional)
• Remote start - rear defrost – enable (optional)
• Remote start - steering feel – enable (optional)

some guides recommend
RTM module - configuration parameters
don't change anything :!: ( old keys can also be used in the future )
RTM module depends on how the key has been programmed. I had to change my region in the RTM module to asia to got the new key working. Just try to buy a original (used) key region europe and you can also use the old keys without changing the RTM module.
andyh1108
Posts: 36
Joined: Mon Jan 30, 2017 7:00 pm
Vehicle: Edge 2.0 TDCi 210

Re: REMOTE START

Post by andyh1108 »

jonrocks wrote:
Fri Aug 06, 2021 1:36 pm
andyh1108 wrote:
Wed May 06, 2020 3:26 pm
fordsmax471 wrote:
Tue Dec 17, 2019 6:19 pm
Hi !

Remote start the car ( Ford S-Max 2.0 TDCi 2017 PowerShift EU )

4Button Remote smart Key 434MHZ DS7T-15K601-EF

guide for Ford S-Max mk2
To activate Remote Start, first you need a new key fob with start button (part # DS7T-15K601-EF for S-Max mk2 with 434 MHz).

:!: Note ! remove the metal blanks from the keys, the car doors are closed and the handbrake deactivated.

Programming keys
Determine the backup slot of the passive key.

:arrow: Place the first programmed key in the backup slot. Press the START / STOP button.
Wait for 4-5 seconds, then press the START / STOP button.
Extract the first programmed passive key.

:arrow: Within 5 seconds, place the second programmed passive key in the backup slot, then press the START / STOP button.
Wait for 4-5 seconds, then press the STOP-STOP button.
Extract the second programmed key.

:arrow: Within 5 seconds, place the unprogrammed passive key in the backup slot and press the START / STOP button.

Car doors lock and opened, lights blink
Congratulations on your new key being programmed !!! :)

Now use Forscan to change the asbuilt-data

BCM module- configuration parameters
• Remote start - enable

IPC module - configuration parameters
• Remote start - enable
• Remote start - climate settings- enable
• Remote start - front seat- enable (optional)
• Remote start - rear defrost – enable (optional)
• Remote start - steering feel – enable (optional)

some guides recommend
RTM module - configuration parameters
don't change anything :!: ( old keys can also be used in the future )
Thanks for the information, I assume this is a UK vehicle as I want to add this to my Edge. Can you tell me where you got the key from?

Andy
Hi Andy,

I too am about to do this for the Ford Edge I have a 434 freq key arriving in a few days.

Did you manage to get this working with your FORD EDGE if so do you have any tips?

Thanks

Jon
Hi Jon

Yes, got remote start working, but had to make a change to the RCM module for the remote controls to work

Andy
Post Reply