2010-2013 Mazda 3 Cruise Control Activation

Car configuration discussions and experience sharing
Avari
Posts: 33
Joined: Tue Sep 19, 2017 12:20 am
Vehicle: 2011 Mazda 3i

Re: 2010-2013 Mazda 3 Cruise Control Activation

Post by Avari »

Are you working on your 2007? These calculations are just for the 2010+ Mazda 3 second gen

Your line 7 should end with F11E if it was a 2010+ mz3 with cruise control disabled in the ecu.

We would have to get the ASBUILT data for your car and then a similar car with cruise control and figure this all out again.
ahjack4231
Posts: 2
Joined: Fri Jul 30, 2021 1:38 pm
Vehicle: mazda 3 BL 2.0 MZR

Re: 2010-2013 Mazda 3 Cruise Control Activation

Post by ahjack4231 »

Hi all... Just get Forscan installed yesterday. Do this calculation works on Mazda 3 BM Skyactiv?
Avari
Posts: 33
Joined: Tue Sep 19, 2017 12:20 am
Vehicle: 2011 Mazda 3i

Re: 2010-2013 Mazda 3 Cruise Control Activation

Post by Avari »

It may, what year?
ezakimak
Posts: 4
Joined: Fri Aug 06, 2021 2:15 pm
Vehicle: 2009 Mazda 2 DE 1.5L & 2019 Mazda CX-9 Azami AWD

Re: 2010-2013 Mazda 3 Cruise Control Activation

Post by ezakimak »

Just wanted to say a big thank you to the community.
I have just used the information in this thread to get cruise control working in my 2008 build Mazda 2 in Australia.
Cruise control was never an option for us in this model
Year. As such a lot of the wiring was missing. I have added that and documented it on the Mazda 2 owners group Facebook group.
Wire colour codes, pin locations and circuits.

Here is my before pcm value.
I will try and add the others in another post.
Attachments
7DEC4E58-2169-43A7-87EC-553BA9536559.jpeg
7DEC4E58-2169-43A7-87EC-553BA9536559.jpeg (271.31 KiB) Viewed 552 times
ezakimak
Posts: 4
Joined: Fri Aug 06, 2021 2:15 pm
Vehicle: 2009 Mazda 2 DE 1.5L & 2019 Mazda CX-9 Azami AWD

Re: 2010-2013 Mazda 3 Cruise Control Activation

Post by ezakimak »

Here is the after.
Attachments
86E5EEA2-310F-4C37-BEB5-0700BDFC04F0.jpeg
86E5EEA2-310F-4C37-BEB5-0700BDFC04F0.jpeg (611.17 KiB) Viewed 552 times
ezakimak
Posts: 4
Joined: Fri Aug 06, 2021 2:15 pm
Vehicle: 2009 Mazda 2 DE 1.5L & 2019 Mazda CX-9 Azami AWD

Re: 2010-2013 Mazda 3 Cruise Control Activation

Post by ezakimak »

Also, the SCCS/V line in the oscilloscope allows you to see the cruise control buttons being pressed and seen in the PCM.
Attachments
759639E3-57F9-47EA-BFA8-FF7B3BF5E08B.jpeg
759639E3-57F9-47EA-BFA8-FF7B3BF5E08B.jpeg (308.02 KiB) Viewed 552 times
Post Reply